Commentaires

Nice sharp quiet perfect fit. Time will tell if they last. So far happy.

Exactly what I wanted

I received exactly what was ordered in a timely manner. It arrived quickly in a secure parcel. I am very happy.

This bit works very well. It is large so needs gearing down on speed but it is very well balanced anfd I am very happy with it's performance

I impressed, it is as advertised. I'm ready for some "smooth
Work. Thumbs UP.

I have 2 Dewalt 735 planers and the one with the helical cutterhead cuts better and is a lot quieter. I plan to change the other planers over too! This was a Hugh improvement!

This is an absolutely quality cutter head at a very reasonable price. it has more cutters than the other brands so it's a smoother cut.

Am very satisfied with the vendor (price, shipping timeliness, item quality, etc.), as-well-as the cutterhead (well made, high quality, not cheap).

I just bought the upgrade spiral cutter for my ridgid planer and I can't believe the difference it makes. I have owned a portable planer for 25 years, 3 different makes and they were all the same, even the DeWalt. Less noise, less marks, less vibration so the height adjustment doesn't tend to go up by itself, the wood doesn't stall half way in, even with hardwood. I was hesitant to buy because of the price but in my opinion, it's well worth it. For my planer the installation was very simple. And the shipping is very rapid. All in all I'm really satisfied, I just hope it will stand the test of time. I recommend this to everyone who has been having issues with standard knives and swearing when having problems with the feeding of wood.
Thanks alot for the upgrade.

This head noticeably reduced run noise and produces a great smooth cut. It was a great upgrade to our planer.

So I bought my Delta 22-540 planer off of the original owner and loved it other than the chatter. I had been looking at replacing it with a helical planer, but didn’t want to fork out $800-1500 so I explored the option to clean up, regrease, and replace the cutterhead for my trusty Delta.

Out of the box, the new cutterhead felt solid, slightly heavier than the original. I ordered extra blades and the recommended 6Nm torque wrench as well. It only took me 6 hours for disassembly, cleaning, replace cutterhead and reassembly. I was blown away at the quality of the cut, MASSIVE noise reduction, and ease of dust/chip collection compared to my original straight blade. Honestly a little upset with myself for not taking pre/post dB readings, but it’s a marked improvement from before even without measurements.

Right out of the tube, it cut great, it didn't need sharping. It has good steel and a comfortable handle. I like the way you can track your order from start to finish.

I had a grizzly g1021z planer with idexible head I had to downsize shop and sold it. Well when I moved god my shop back up I did heavy research and I chose this 13 planer. The best decision I made, this machine
Cuts as good as my 15 inch grizzly did. I put a wixey digital reader on it for accuracy. Very little snip and you do not need a head lock it cuts great every time better then other big machines

Well made and came ready to use.

I have only had this planer for a couple weeks now, but so far have been very impressed. The finish really is as everyone says a "mirror finish" and will require much less sanding. Mill marks are almost non existant. I have had a bit of a problem with the board getting stuck, but I havent tried waxing it yet, which I have read will fix that problem. All together this planer has proven all my doubts wrong. I would recommend this to everyone.

When I plane hard and soft wood it is as though I sanded it with 220 grit. No bogging down the motor. Well worth the money.

The conversion process was very straightforward, following the videos. One minor point: the bearings don’t require grease. With an interference fit bearing, it is supposed to be a tight fit, and no grease is needed. I also found a useful PDF on the Dewalt website for adjusting the parallelism of the head to the base: [link](https://support.dewalt.com/hc/en-us/articles/360012667678-How-do-I-adjust-the-cutter-head-on-my-DW733-DW734-so-it-is-parallel-to-the-base). After the upgrade, the DW733 is working great and producing an excellent finish. So far, I’ve planed redwood (slow grown pine) and Sapele and I’m very satisfied with the results.

I've only run a few boards through it so far but it works perfectly. You can't get a spiral head planer for this price. Everything was square out of the box - no adjustments needed. Definitely worth the price.

They shipped the planer quickly. It was damaged in rout, like so many items these days. The packaging was very sturdy but the box was dropped enough to damage some big strong bolts. They were quick to validate my claim and send out a new machine. The new planer was perfect and works great. It was easy to setup. I had not heard of this company before but they seem to be in the business of making their customers happy.

Wow what a difference!! The cutter head was delivered in two days, was well packaged and installed in about two hours. Almost dont need hearing protection. Although I still recommend you wear it. I ran about two hundred board feet of ash through the planer and the surface finish was like glass. I almost felt that sanding it with 220 grit would roughen the surface. Wish I would have installed it a long time ago.

Awsome product easy to install man what a difference it makes

Received the tool, cutting edge profile was ready to work. Initial shaping very good and the length of tool is just right. Highly recommended.

This seems to work great. Just watched a video and it went in just like it said. I actually found a broken part on my planer when I took it apart.

Got it installed just a few days ago using an online video. The pamphlet is a difficult read. One improvement I’d recommend is providing new snap rings for the gearbox chain. All went well. Planed some hardwood and pine too. All came out smooth as butter. About a 220 finish. I like it.

For many years I used a Dewalt 13” surface planer, which I lugged from the cellar to the outdoors, because of the noise (the Dewalt is a screamer) and the dust. Tired of lugging that beast up & down steep stairs, I gave it away to a friend. Findbuytool FB131H is probably 30 pounds lighter and much quieter (yes, I know it’s a single speed). even though it’s considerably lighter, it doesn’t dance around the stand that I rest it on when it’s being used. There’s some sniping, but that’s to be expected. I’ve planed yellow pine & white ash; both woods were satisfactorily planed.