Reseñas

Received the tool, cutting edge profile was ready to work. Initial shaping very good and the length of tool is just right. Highly recommended.

This seems to work great. Just watched a video and it went in just like it said. I actually found a broken part on my planer when I took it apart.

Got it installed just a few days ago using an online video. The pamphlet is a difficult read. One improvement I’d recommend is providing new snap rings for the gearbox chain. All went well. Planed some hardwood and pine too. All came out smooth as butter. About a 220 finish. I like it.

AMAZING! Installation was a bit of a challenge, but much smoother surface, a lot less load on the planer motor, and about half as noisy.

This helical head cutter is much better than the original chopper blades! It was not hard to install - took me about 2 hours but I was making a video at the same time for YouTube. I thought the color instructions were fine - just make sure to keep up with all the pieces!

I was skeptical about this planer head from reviews on YouTube and other sites, but I took the plunge and decided to purchase it from FindBuyTool and I'm so glad I took the leap. First thing first FindBuyTool is in my opinion is probably the best place to buy from with exceptional communication and fast delivery. They even contacted me when I uninvertedly place the wrong torque wrench for the cutter knives which saved me alot of problems. They are A1 in my book. Now for the elliptical cutter. Installation was breeze everthing fit perfect and it took about 30 minutes to complete the whole exchange, and around minutes to install the knives. I suggest purchasing the torq wrench along with the head it makes installing the knives effortlessly and takes out the guess work, not to mention it saves from breaking the cutter from to much pressure being applied. I personally think it is a wonderful planer head, it cuts so cleanly and smooth no markings on the material whatsoever. I can honest say that it made the planer at least 35% quieter is not more. It sounds more like a trim router running 1/2" cove bit at full cut 1 pass. I took 1/16 pass on 9" hickory wood and it wasn't loud at all without ear protection and it came out perfectly smooth even on dimensioning speed. On finishing speed was even better and still not loud. In my opinion it's a great cutter and exceptional place to purchase from. Thanks goes out to FindBuyTool for exceptional service and purchase. Will definitely use them in the future.

Looks good and the correct size. Needed it as a replacement that I haven't used yet.

Fingernail / Convex Edge Router bit-0605A

The tool is sharp out of the box. The grind is not my preference so I am slowly changing the grind. I do this to most of my tools. I highly recommend the product.

Working perfectly. Will order additional bits when needed. Only place I will go.

I bought these to use to cut wood on a metal lathe...I made my own holders and they are my "goto" cutters now...I make custom pens and use very expensive wood and don't want a cutter problem...I have ordered these twice recommend them to everyone...

I love the bits very well built with quality parts
I bought two different sizes the only thing they say 1/2 bit but the shaft on one of them is bigger I think 5/8

Nice quality product, fit perfectly, the 4-sided carbide blades will offer long life.

This is such an awesome upgrade for my Delta jointer. Quiet and leaves a smooth finish even on figured wood. Wish I’d upgraded years ago!

Love it does a better job than the knives and is quieter

This was a custom build based on my drawings. Communications was great and we made sure everything was correct before milling. Product came carefully packaged and was TO DIMENSION and fit perfectly. After tuning my tables, cuts were fantastic, smooth running and much quieter. Great company to work with...

Carbide Burrs Set Carvepro Range 3mm(1/8in.) Shank, 10Pcs

The cutter head fit really well and install went great. This thing cuts like a dream.

My DW733 served me well through many projects over the years but, after getting a jointer with a helical cutter head, I began to appreciate the advantages such a head offers (quieter operation, smoother surfacing, and improved maintainability). I started thinking about replacing or upgrading my planer to gain the same advantages. The competitive price and positive reviews for your product convinced me to go with an upgrade (switching out the cutter head on my DW733). I appreciated the responsive communication throughout the order fulfillment and shipping process. I was able to do the installation and setup of the new cutter head in a day of careful, methodical work. The Youtube video referenced on your website told me all I needed to know for a successful install (watched it several times and took notes to map out procedures before starting - highly recommended). Since the upgrade, I’ve used my planer with the new cutter head to mill ~60 BF of Cherry and White Oak. I am totally satisfied with the performance.

Easy to install and works great. Lower noise level, smoother finish and bettern dust control.

much improved performance from old DeWalt planer

Great quality, quick delivery.

An Excellent product! It is very well made easy to install and works perfectly with the Dewalt 735 Planer. After installation and attaching the blades it worked perfectly first time! Very impressed.

It works too well that I gotta buy a jointer now...woah is me. Dust collection works pretty well, and the blades have least a perfectly smooth surface. I know people replace the blade for a spiral, but honestly I'm good with this.

This helical cutter head worked perfect with my Dewalt DW735. The installation instructions need some improvement, but there are videos on YT that you can watch for that. Strange that the country of manufacturer isn't labeled on it... would like to know that. Have nothing but positive feedback of the tool though.