Comentários

Based on 413 reviews
92%
(382)
7%
(27)
0%
(2)
0%
(2)
0%
(0)
Carbide insert knives

Great service and reasonably priced

Thank you so much for taking the time to leave us a review! We strive to provide the best products and customer service possible, and it's always wonderful to receive feedback like this. We appreciate your support and hope to continue serving you in the future.

First Rate!

Very impressed at least for how it looks. I have not used it yet, so cannot really give a fair review. But the quality looks first rate.

Thank you for taking the time to leave a review! We hope it performs just as well as it looks when you get a chance to use it.

It's so much quieter...

So far this has been a great purchase. If anyone has been on the fence like I was, jump and make the purchase. I haven't personally used the Byrd branded cutter, but, I have a hard time believing the added cost of one of those is worth it in comparison to the cutter head from find buy tool.
My only complaint thus far is that I had 3 inserts crack and fall to the feed table in pieces overnight after installing them to the recommended torque. When this happened it hadn't been turned on yet after installing the cutter bar. Besides that. A quick change of inserts and I ran some 8 inch wide stock through to see the result. So quiet compared to the straight blades. And that's with upgraded carbide blades from infinity.
Other than the broken inserts I'm very happy with my purchase.

Thank you for taking the time to leave a review. We apologize for the issue with the cracked inserts and we will definitely look into this further.
Thank you for choosing our product and for your valuable feedback.

Great service

I ordered some replacement cutters and am very pleased with the quality of the carbide. Additionally the customer service and communication was excellent. Highly recommended.

Thank you for your kind words and recommendation! We are glad to hear that you are pleased with the quality of our carbide and our customer service. Our team always strives to provide the best experience for our customers. Thank you for choosing our Woodturning Carbide Insert Cutters!

General 80-100 helical cutter head

Love my new helical cutter head . Installed it in a General 80-100 jointer all went well . It arrived on time and in good condition thanks to the strong packaging.

Thank you for your positive feedback! We take pride in our packaging to ensure your product arrives safely and on time.

Satisfaction

Item arrived as described. Installed with relative ease. Extremely satisfied with my purchase.

Thank you for taking the time to leave a review. We greatly appreciate your support!

Thanks for a fantastic tool!

The flush trim router bit from Findbuy tools helped me be a better woodworker!
Thank you for for a fantastic tool with a incredible high quality.
Delivered on my door and few days after order.
Thanks!

We're thrilled to hear that the bit helped you. We take pride in providing high-quality tools at an affordable price. Thank you for choosing our product and for taking the time to leave us a positive review. Happy woodworking!

Inserts

Perfect fit, perfect finish.

Thank you for your positive feedback!

Helical cutterhead for 1942 Craftsman jointer

I had to make a couple of modifications for it to fit, but all was good and works so well. Th as thanks again. Patrick

Hi Patrick, thank you for taking the time to leave a review. You must be very skillful at machining!

Impressed

I installed the helical cutter head and the cut is so much better than the knives the cost was the best I could find and I am very pleased

Thank you for your review! We strive to provide high-quality products at the best prices, and we are happy to know that you are pleased with your purchase. Thank you for choosing our product.

Router Bits for Festool Dominos, 4Pcs

Beautifully made. Very prompt delivery.

Thank you for taking the time to leave a review for our Router Bits for Festool Dominos. We are delighted to hear that you are satisfied with this purchase. We appreciate your feedback and hope to continue providing you with excellent products and service in the future. Thank you for choosing our brand!

Domino Router Bits

These are awesome. They cut the profile with the ringed edges perfectly. Takes a little of finessing to get set up but once you do you can run hundreds of dominos at once.

Thank you for choosing our product and leaving a positive review!

KC-8HJC Helical Planers Jointers 14.3x14.3x2.0mm

I received these Carbide Insert for my King Canada jointer and installed them and they work weary well. I was very pleased with the way they were shipped and packed.

Thank you for your positive feedback! We are glad to hear that you are satisfied with the insert knives. Our team takes great care in packaging and shipping our products, so we are happy to know that it arrived safely. Thanks for choosing our product and we hope it continues to meet your expectations.

Tenon router bit

Great router bit to make tenons for Festool Domino.

Thank you for sharing your thoughts with us. Hope we have a chance to serve you again in the future.

Carbide Inserts

Super keen edges working extremely well and long lasting.

Thank you for the positive feedback! We appreciate your business and hope to continue providing you with top-notch products.

The cutter had arrived and worked out great. We’re enjoying the quiet that it provides nice part ...

The helical cutterhead arrived and we installed it. It works great, and we are very pleased with it and how it works. Thank you.

Thank you for your kind review and for choosing our helical cutter head! Hope it continues to provide you with a good planing experience. We appreciate your support and feedback.

These Domino tenon cutters are fantastic!

I'm absolutely stoked with these cutters, i've been making over sized tenons for my Festool Domino, and they are great! Terrific value.

Thank you so much for your fantastic review of the router bits! We are thrilled to hear that you are stoked with the cutters and that they have been working great for making oversized tenons for your Festool Domino. We appreciate your support and are happy to provide terrific value for your woodworking needs.

DW733 replacement

Replacement wasn’t too hard if you have decent skills and tools. Fit well. Video instructions didn’t address how to calibrate the 2 jackscrews for parallel. I got lucky and when I reassembled it was within .002 of each side which is acceptable. But could present an issue for other installers. But very happy with the cutterhead!

Thank you for taking the time to leave a review for our helical head. Thank you for choosing our cutterhead and for sharing your experience with us. Have a great day!

festool Domino

With glue joints it's perfect for the work

Thank you for your feedback on our router bits. We're glad to hear that the product has been perfect for your glue joints. We appreciate your support and hope to continue providing you with quality tools for your projects.

As Described

Product is as described and should do the job. Fast, accurate service at a reasonable price.

Thank you for your positive feedback! We appreciate your business and hope to serve you again in the future.

perfect fit

Tank you

Thank you for your review!

Great blades at a great price!

These blades cut great. Shipping was fast. Now that I have used them, I will be ordering multiple sets.

Thank you for your positive review! We are glad to hear that our jointer blades are working well for you. We appreciate your support and look forward to providing you with more great products in the future. Thank you for choosing our brand!

Great product

Easy to install, quiet, makes smooth as glass boards. Makes small chips, which my dust collection loves.

Thank you for your positive review of our Helical Cutterhead. Our team worked hard to design a product that produces smooth cuts and minimizes dust, so we are glad to hear that it is meeting your expectations. Thank you for choosing our product!

Couldn’t be happier

Quality seems to be excellent. Haven’t put many hours on it yet but the fit up and cut quality are perfect with initial test runs. To make this upgrade for $300 it can’t be beat. The YouTube video for installation was a great help.

Thank you for your positive feedback! We are glad to hear that you are happy with the quality of our product. We hope it continues to meet your expectations for many more hours of use. Thank you for choosing our helical cutterhead!

Felder Hammer C3-31

I installed the cutterhead on a Felder Hammer C3-31 combination machine. It was machined well and cuts very smoothly leaving a great finish compared to the straight knives I had before.

Thank you for your feedback! We are glad to hear that you enjoy the cutterhead. We strive to provide high-quality products and we are happy to know that it has met your expectations. Thank you for choosing our product and we hope it continues to serve you well.