M6x15 Screw for Insert Knife
I like it a lot. Main goal was to alleviate the saw dust problem created by the original blades - always jamming my dust collection system (just a 6HP Shop Vac with a cyclone) and spitting sawdust all over the place. I still get some saw dust spit out of the planer but its a lot less as the Shop Vac gets a majority of it. I had been looking into better dust collection systems but they're more expensive than the helical head and between the DW734's original blades and overall design, I don't believe any dust collection system could efficiently remove the dust.
I've also noticed better planed surfaces on the wood.
No instructions came with it but there's a few detailed instruction videos in YouTube that lead you through the process. I suggest buying a new drive belt. They're difficult to install and nearly impossible to remove. I had a spare belt so I just cut off the existing one.
The purchase and delivery from FindBuyTool was stress-free.
Thank you for taking time to leaving your comments. We are happy to hear that our product has helped alleviate your sawdust problem and provided better planed surfaces on your wood. We strive to provide a stress-free purchasing and delivery experience for our customers. Thank you for choosing FindBuyTool.
Item was advertized. Took a lot of hammering to get old bearings out and new bearings in but all together it took me about four hours. Smooth cut, Quieter. Like four rows over two rows of cutters. I like it.
Thank you for leaving your review. We understand that installation can sometimes be challenging, but we are pleased to hear that the result was a smooth and quieter cut. We appreciate your business and hope you continue to enjoy the four rows of cutters on your planer. Thank you for choosing our product!
There is everything right about this cutterhead. My problem is OCD like. My planer is nearly 30 years old so when I disassembled it to replace the cutterhead everything needed complete cleaning and regreasing. It took 8 hours to do this job. It should have taken 2-3 for just the replacement.
Thank you for taking the time to leave a review! We know the installation process may not be easy but we hope you enjoy the result.
Finish has been pretty damn good so far, instructions were EZ. Good product if it holds up
Thank you for taking the time to leave a review. We're glad to hear that you enjoy the cutter head . We strive to provide high-quality products that hold up over time, and we hope this continues to meet your expectations with each use. Thank you for choosing our product.